Spacer Rings

Авто и мототранспорт и все что с этим связано.
Ответить
Аватара пользователя
ingvar
Маньяк
Сообщения: 2549
Зарегистрирован: 26 июл 2006, 11:19
Откуда: Vancouver

Spacer Rings

Сообщение ingvar »

Has anyone used wheel spacer rings for brake rotors (between a rotor and a hub) to center brake rotors?
Аватара пользователя
TOLM
Маньяк
Сообщения: 3548
Зарегистрирован: 26 авг 2012, 16:22
Откуда: Владивосток-Москва-Суррей

Re: Spacer Rings

Сообщение TOLM »

Zabei
Аватара пользователя
ingvar
Маньяк
Сообщения: 2549
Зарегистрирован: 26 июл 2006, 11:19
Откуда: Vancouver

Re: Spacer Rings

Сообщение ingvar »

TOLM писал(а):Zabei
??
Аватара пользователя
Vog
Завсегдатай
Сообщения: 229
Зарегистрирован: 02 май 2007, 06:29

Re: Spacer Rings

Сообщение Vog »

I don't think there are spacers which go between rotor and hub... it's quite impossible... Unless you're trying to fit different rotor, which is not good idea.
Аватара пользователя
ingvar
Маньяк
Сообщения: 2549
Зарегистрирован: 26 июл 2006, 11:19
Откуда: Vancouver

Re: Spacer Rings

Сообщение ingvar »

Vog писал(а):I don't think there are spacers which go between rotor and hub... it's quite impossible... Unless you're trying to fit different rotor, which is not good idea.
Yes, it is a different rotor (a bit). The outer diameter of that rotor is the same as the one of the original, as well as the thickness. The hub is 4mm larger in diameter. If spacer rings are used then it is centered, and lug nuts will fasten the rotor.
The original one is quite pricey - around 350$ (US made). The supplement is only 100$.
There are spacers that go between a wheel and a hub (use them). Why not use such spacers between a rotor and a hub.
Аватара пользователя
Vog
Завсегдатай
Сообщения: 229
Зарегистрирован: 02 май 2007, 06:29

Re: Spacer Rings

Сообщение Vog »

Ok, then it's not spacer it's centric ring.
Spacers are used to change offset of wheel. I thought you are trying to center rotor within the bracket which holds brake pads...
If the difference in rotors is ONLY center hole diameter, then it should be OK.
I never heard about centric rings for rotors. Search it or worst case you'll need to order it.
borei
Маньяк
Сообщения: 4865
Зарегистрирован: 18 авг 2008, 14:51

Re: Spacer Rings

Сообщение borei »

Не понял как там суппорта будут, если ротор сместится вдоль оси ???
Ответить