Каморка

Has anyone used wheel spacer rings for brake rotors (between a rotor and a hub) to center brake rotors?

Zabei

TOLM писал(а):Zabei

??

I don't think there are spacers which go between rotor and hub... it's quite impossible... Unless you're trying to fit different rotor, which is not good idea.

Vog писал(а):I don't think there are spacers which go between rotor and hub... it's quite impossible... Unless you're trying to fit different rotor, which is not good idea.

Yes, it is a different rotor (a bit). The outer diameter of that rotor is the same as the one of the original, as well as the thickness. The hub is 4mm larger in diameter. If spacer rings are used then it is centered, and lug nuts will fasten the rotor.
The original one is quite pricey - around 350$ (US made). The supplement is only 100$.
There are spacers that go between a wheel and a hub (use them). Why not use such spacers between a rotor and a hub.

Ok, then it's not spacer it's centric ring.
Spacers are used to change offset of wheel. I thought you are trying to center rotor within the bracket which holds brake pads...
If the difference in rotors is ONLY center hole diameter, then it should be OK.
I never heard about centric rings for rotors. Search it or worst case you'll need to order it.

Не понял как там суппорта будут, если ротор сместится вдоль оси ???