Покритикуйте пожалуйста резюме Electrical Engineer
Добавлено: 22 авг 2011, 05:23
Собственно собираюсь приезжать в Ванкувер в начале 2012.
Сильно не пинайте, это мое первое резюме на английском. Спасибо всем кто отзовется.
PETR IVANOV
Cellular (778) ********* **** Barnet rd.
Burnaby, BC, V5A***, CANADA
*************@gmail.com
Objective
An electrical engineer position in a results-oriented company that seeks an ambitious and career-conscious person, where acquired vast knowledge, experience, unique skills and abilities in a field of electrical and computer engineering will be utilized toward continued rapid growth and advancement.
Career Highlights
• Designed a computer-based monitoring and control system with encrypted data storage for electroplating workshop with innovative system of measuring and controlling current density. With such control system the customer's workshop became eligible for certification in aerospace industry, productivity increased by 200 % and extra process flexibility was added.
• Introduced a new design of the aerodynamic and control system of the dryer of the wet-process PCB etching line. The efficiency of the dryer was improved by 40 %.
• Designed a built-in control system with four synchronous interconnected electrical drives of conveyor for the company's new series of etching lines for ultra-thin PCBs instead of an old stand-alone control system with one electrical drive and mechanical transmission of conveyor. Reduced installation and manufacturing time, size of the line. Increased manufacturability of the line.
• New electric CAD programs with databases of components were integrated into design process. As expected automated CAD software allowed to reduce design time of control systems up to 300%.
• Achieved up to 100% reduction in copper wiring and clamps usage for high-current rectifiers smartly reconsidering the concepts of low-voltage wiring. This led to saving 70 000 $ annually.
Experience
**********************************, Ukraine
Electrical engineer, 2009 - 2011
• Completed complex assignments utilizing Labview, PLC programming languages to develop or improve systems and associated equipment for general electroplating and PCB-manufacturing equipment.
• Developed engineering and installation specifications, trained personnel and monitored compliance with company's standards.
• Designed and built electrical control systems for electroplating and PCB wet-process lines.
• Built communication networks (RS485, RS232, Ethernet, CAN, Profibus, USB) and software for them.
• Identified problems and proposed solutions for automation software of electroplating and PCB workshops.
• Configured and inspected electrical and software products before shipping to customers.
• Built prototype machinery and made modifications to existing equipment for improving its efficiency, productivity and manufacturability.
• Coordinated and performed installations, maintenance and repairs of thyristor-controlled electroplating rectifiers.
• Mantained the company's telecomunication and LAN networks, computer hardware and software.
********************************************, Ukraine
Electrician (simultaneously with studying), 2007 - 2009
• Analized electrical drawings, and uses them for further interpretation and installation of electrical components on the company's equipment according to determined layouts.
• Installed, troubleshooted and replaced electrical wiring with voltage up to 1000 volts and cable assembles of the company's buildings and equipment.
• Tested and installed control instrumentation, switchboards and transformers.
• Installed, calibrated and tested electrical and electronic computerized automatic control systems of the company's equipment.
Education and Training
Masters honors degree, Electromechanics, 2010
******************** National University, UKRAINE
Thesis: Research of frequency controlled induction motor system in static and dynamic modes.
Bachelor of Science honors degree, Electromechanics, 2009
******************** National University, UKRAINE
Skills
• Programming: Labview (with different tookits and modules), PLC programming languages, Wonderware SCADA, Mathcad, basics of C++, C#, JAVA, and MATLAB
• CAD Software: Solidworks, Autodesk Inventor, AutoCAD Electrical
• Misc. software: MS Word, Excel, Powerpoint, Access, MS Windows (including Embedded versions), Adobe Photoshop
• PLCs: Unitronics, Siemens, Mitsubishi
• Control Engineering, Electrical Circuits, Industrial Electronics, Embedded FPGA Systems
• Planning and Organizational Skills
• Research / Report Writing
Сильно не пинайте, это мое первое резюме на английском. Спасибо всем кто отзовется.
PETR IVANOV
Cellular (778) ********* **** Barnet rd.
Burnaby, BC, V5A***, CANADA
*************@gmail.com
Objective
An electrical engineer position in a results-oriented company that seeks an ambitious and career-conscious person, where acquired vast knowledge, experience, unique skills and abilities in a field of electrical and computer engineering will be utilized toward continued rapid growth and advancement.
Career Highlights
• Designed a computer-based monitoring and control system with encrypted data storage for electroplating workshop with innovative system of measuring and controlling current density. With such control system the customer's workshop became eligible for certification in aerospace industry, productivity increased by 200 % and extra process flexibility was added.
• Introduced a new design of the aerodynamic and control system of the dryer of the wet-process PCB etching line. The efficiency of the dryer was improved by 40 %.
• Designed a built-in control system with four synchronous interconnected electrical drives of conveyor for the company's new series of etching lines for ultra-thin PCBs instead of an old stand-alone control system with one electrical drive and mechanical transmission of conveyor. Reduced installation and manufacturing time, size of the line. Increased manufacturability of the line.
• New electric CAD programs with databases of components were integrated into design process. As expected automated CAD software allowed to reduce design time of control systems up to 300%.
• Achieved up to 100% reduction in copper wiring and clamps usage for high-current rectifiers smartly reconsidering the concepts of low-voltage wiring. This led to saving 70 000 $ annually.
Experience
**********************************, Ukraine
Electrical engineer, 2009 - 2011
• Completed complex assignments utilizing Labview, PLC programming languages to develop or improve systems and associated equipment for general electroplating and PCB-manufacturing equipment.
• Developed engineering and installation specifications, trained personnel and monitored compliance with company's standards.
• Designed and built electrical control systems for electroplating and PCB wet-process lines.
• Built communication networks (RS485, RS232, Ethernet, CAN, Profibus, USB) and software for them.
• Identified problems and proposed solutions for automation software of electroplating and PCB workshops.
• Configured and inspected electrical and software products before shipping to customers.
• Built prototype machinery and made modifications to existing equipment for improving its efficiency, productivity and manufacturability.
• Coordinated and performed installations, maintenance and repairs of thyristor-controlled electroplating rectifiers.
• Mantained the company's telecomunication and LAN networks, computer hardware and software.
********************************************, Ukraine
Electrician (simultaneously with studying), 2007 - 2009
• Analized electrical drawings, and uses them for further interpretation and installation of electrical components on the company's equipment according to determined layouts.
• Installed, troubleshooted and replaced electrical wiring with voltage up to 1000 volts and cable assembles of the company's buildings and equipment.
• Tested and installed control instrumentation, switchboards and transformers.
• Installed, calibrated and tested electrical and electronic computerized automatic control systems of the company's equipment.
Education and Training
Masters honors degree, Electromechanics, 2010
******************** National University, UKRAINE
Thesis: Research of frequency controlled induction motor system in static and dynamic modes.
Bachelor of Science honors degree, Electromechanics, 2009
******************** National University, UKRAINE
Skills
• Programming: Labview (with different tookits and modules), PLC programming languages, Wonderware SCADA, Mathcad, basics of C++, C#, JAVA, and MATLAB
• CAD Software: Solidworks, Autodesk Inventor, AutoCAD Electrical
• Misc. software: MS Word, Excel, Powerpoint, Access, MS Windows (including Embedded versions), Adobe Photoshop
• PLCs: Unitronics, Siemens, Mitsubishi
• Control Engineering, Electrical Circuits, Industrial Electronics, Embedded FPGA Systems
• Planning and Organizational Skills
• Research / Report Writing
