Field service engineer, будьте любезны - максимум критики!!!
Добавлено: 21 окт 2006, 12:05
Уважаемые дамы и господа, пожалуйста дайте оценку нижеследующему тексту, который, хочется надеяться, превратится с вашей помощью в полноценное резюме. На форматирование текста внимания не обращайте - выглядит неплохо. Английский - язык не родной, потому править коряво составленные фразы постараюсь с носителем языка, но если увидите ЛЯПЫ - милости прошу открыть мне зеньки на них.
Кстати, в Канаду попаду только в следующем году, в декабре летим поставить ногу on Canadien soil. Возможно ли попасть на интервью при таких условиях?
Заранее благодарен.
Name address: bla-bla
e-mail:
Objective:
To obtain a challenging position of field service engineer (technician) in perspective, dynamic company where I could implement my skills and experience in the best way, and contribute them to company’s success.
Summary of Qualifications
• Application Support • Project Management • Pre and Post Sales Support
• P&L Responsibility • Contract Negotiations • Service management
• Product Marketing • Quality Control • Solving complicated technical problems
Technical skills
• 10 years experience in managing (including P&L responsibility), contract negotiation and project costs estimation, service management, and application support of different types of projects for petrochemical (Oil refinery http://www.orl.co.il), microelectronics (ADT, subsidiary of Intel http://www.intel.com) and pharmaceutical industry (TEVA, http://www.teva.co.il) and others.
• Excellent knowledge of (НУЖНО? principles, techniques and standards of different type of) measuring and testing equipment for laboratories (НУЖНО? of chemical, medicine and petrochemical industry) - PAC group (USA, http://www.paclp.com) – world leader manufacturer for petrochemical industry, and many other vendors. (10 years)
• In-depth knowledge of cooling, heating, refrigerating, environmental (humidification etc) systems for laboratories and production plants - LAUDA (http://www.lauda.de) – the world leader in cooling\heating, measuring systems, Carel (http://www.carel.com), other OEM vendors. (10 years)
• Exceptional skills with complex electro-mechanical systems and components.(10 years)
• Very good knowledge of DAQ systems – both hardware and control software, Desin instruments (http://www.desin.com, DAS-8000, LS-3000, HS-7000 etc). (5 years)
• Good knowledge of calibration procedures and techniques, calibration standards and calculations. (5 years)
• Good knowledge of video recognizing systems.
• PLC (Allen Bradley etc).
• Deep knowledge in programmable communication interfaces (RS-232, RS-485), different types of transducers and transmitters, calibrators.
• PID programmable controllers.
• OrCAD 7.0, LabView 6.0
• Proficient in Windows 98/ Me/ XP.
• Strong knowledge of Microsoft Office XP, Microsoft Office 2003.
• ISO 9002 rev. 2000
Professional experience and achivements
07.1997 – present Service and product manager.
M.Avni & Son Ltd. Haifa – the leader company on Israeli market of laboratory equipment for medicine, chemistry, food etc.
• Reorganized service structure of the company for more proficiency and effectiveness, which cut the service costs in more than 10 %.
• Organized regular service and maintenance training for service staff, which led to increasing of service quality and thus customers’ satisfaction and that increased service contracts in 60 % during 2 years.
• Brought on board to correct quality issues that had affected sales and market share, increase over 40% in selling quality calibration tests.
• Carried out service work on company sold equipment and provide technical service on the installation and commissioning of new and/or used equipment, providing solutions to complex technical problems.
• Studied the market and composed lists of “Red line” and “Yellow line” spare parts; this led to decreasing of service time and thus rose up customer satisfaction.
• Evaluating maintenance service contracts and preparing necessary documentation.
• Researching customers’ demands, technical advising, and negotiation of technical aspects of projects.
• Preparing templates for service reports, installation, quality test and calibration reports.
• Managed and conducted after sales customer training and courses.
• Preparing documentations for presentations and exhibitions.
08.1996 - 06.1997 QC Technician
Kvalim – high voltage cables manufacturer.
• Output quality control of high voltage cables. I was the first person who studied and started working on completely new testing technology based on microcontroller equipment, which significantly reduced testing time.
04.1989 - 05.1995 Electronics engineer
Motorostroitel, Zaporozhie – the biggest air jet motors manufacturer in Ukraine.
• Design, manufacture managing, installation supervising, upgrading and maintenance of automatic measuring system, which provided measuring and presenting more than 35 different air jet motor parameters.
Education and professional courses
• 1989 - B.Sc.D. Electro-mechanics engineer ….University.
• 2006 – … measuring systems, …, Germany
• 2006 – Course calibration of temperature, humidity, velocity measuring systems (certified diploma), Israel.
• 2005 – laboratory cooling/heating systems, ., Germany.
• 2004 – measuring systems, …, Germany
• 2003 – industrial …., Germany
•
Personal Skills
• Excellent ability to study and understand new material in short period of time.
• Self-motivated and able to work in self-sufficient manner.
• Strong analytical and problem-solving skills.
• Able, like and ready for traveling, if job will require it.
• Languages: English, Russian, Hebrew.
• Driver license.
References are available upon request.
Кстати, в Канаду попаду только в следующем году, в декабре летим поставить ногу on Canadien soil. Возможно ли попасть на интервью при таких условиях?
Заранее благодарен.
Name address: bla-bla
e-mail:
Objective:
To obtain a challenging position of field service engineer (technician) in perspective, dynamic company where I could implement my skills and experience in the best way, and contribute them to company’s success.
Summary of Qualifications
• Application Support • Project Management • Pre and Post Sales Support
• P&L Responsibility • Contract Negotiations • Service management
• Product Marketing • Quality Control • Solving complicated technical problems
Technical skills
• 10 years experience in managing (including P&L responsibility), contract negotiation and project costs estimation, service management, and application support of different types of projects for petrochemical (Oil refinery http://www.orl.co.il), microelectronics (ADT, subsidiary of Intel http://www.intel.com) and pharmaceutical industry (TEVA, http://www.teva.co.il) and others.
• Excellent knowledge of (НУЖНО? principles, techniques and standards of different type of) measuring and testing equipment for laboratories (НУЖНО? of chemical, medicine and petrochemical industry) - PAC group (USA, http://www.paclp.com) – world leader manufacturer for petrochemical industry, and many other vendors. (10 years)
• In-depth knowledge of cooling, heating, refrigerating, environmental (humidification etc) systems for laboratories and production plants - LAUDA (http://www.lauda.de) – the world leader in cooling\heating, measuring systems, Carel (http://www.carel.com), other OEM vendors. (10 years)
• Exceptional skills with complex electro-mechanical systems and components.(10 years)
• Very good knowledge of DAQ systems – both hardware and control software, Desin instruments (http://www.desin.com, DAS-8000, LS-3000, HS-7000 etc). (5 years)
• Good knowledge of calibration procedures and techniques, calibration standards and calculations. (5 years)
• Good knowledge of video recognizing systems.
• PLC (Allen Bradley etc).
• Deep knowledge in programmable communication interfaces (RS-232, RS-485), different types of transducers and transmitters, calibrators.
• PID programmable controllers.
• OrCAD 7.0, LabView 6.0
• Proficient in Windows 98/ Me/ XP.
• Strong knowledge of Microsoft Office XP, Microsoft Office 2003.
• ISO 9002 rev. 2000
Professional experience and achivements
07.1997 – present Service and product manager.
M.Avni & Son Ltd. Haifa – the leader company on Israeli market of laboratory equipment for medicine, chemistry, food etc.
• Reorganized service structure of the company for more proficiency and effectiveness, which cut the service costs in more than 10 %.
• Organized regular service and maintenance training for service staff, which led to increasing of service quality and thus customers’ satisfaction and that increased service contracts in 60 % during 2 years.
• Brought on board to correct quality issues that had affected sales and market share, increase over 40% in selling quality calibration tests.
• Carried out service work on company sold equipment and provide technical service on the installation and commissioning of new and/or used equipment, providing solutions to complex technical problems.
• Studied the market and composed lists of “Red line” and “Yellow line” spare parts; this led to decreasing of service time and thus rose up customer satisfaction.
• Evaluating maintenance service contracts and preparing necessary documentation.
• Researching customers’ demands, technical advising, and negotiation of technical aspects of projects.
• Preparing templates for service reports, installation, quality test and calibration reports.
• Managed and conducted after sales customer training and courses.
• Preparing documentations for presentations and exhibitions.
08.1996 - 06.1997 QC Technician
Kvalim – high voltage cables manufacturer.
• Output quality control of high voltage cables. I was the first person who studied and started working on completely new testing technology based on microcontroller equipment, which significantly reduced testing time.
04.1989 - 05.1995 Electronics engineer
Motorostroitel, Zaporozhie – the biggest air jet motors manufacturer in Ukraine.
• Design, manufacture managing, installation supervising, upgrading and maintenance of automatic measuring system, which provided measuring and presenting more than 35 different air jet motor parameters.
Education and professional courses
• 1989 - B.Sc.D. Electro-mechanics engineer ….University.
• 2006 – … measuring systems, …, Germany
• 2006 – Course calibration of temperature, humidity, velocity measuring systems (certified diploma), Israel.
• 2005 – laboratory cooling/heating systems, ., Germany.
• 2004 – measuring systems, …, Germany
• 2003 – industrial …., Germany
•
Personal Skills
• Excellent ability to study and understand new material in short period of time.
• Self-motivated and able to work in self-sufficient manner.
• Strong analytical and problem-solving skills.
• Able, like and ready for traveling, if job will require it.
• Languages: English, Russian, Hebrew.
• Driver license.
References are available upon request.
)
Я не злюсь, просто странно видеть, как "наивны" люди.
З.Ы. Извини, если обидел. Не повторяй чужих ошибок.
