И мне тоже захотелось. Чтобы мое резюме покритиковали :-)
Добавлено: 25 окт 2006, 21:12
Ales Niamiha, PhD
999 Technology Dr., Kanata, ON
Phone:
email:
Objective
A position of a leading research scientist in Pinnacle Engine Technology Ltd.
Summary
- Ten years' experience in real-time embedded system design and development
- Seven years' experience in modern telecom industry: theory, software, hardware, systems
- Six years' experience with measurement and control systems for gasoline and diesel engines
- Five years' experience in research on exhaust gas aftertreatment and pollution control
- Four years' experience in design and manufacturing of high-voltage electronic equipment
Experience
1999 - Present
Southtel Networks
Ottawa ON
Position: Software Designer
> Major projects:
- Southtel GSM Test Tool (since 2005)
- Southtel GSMasestation2003-2005)
- Southtel CDMA Modem (NCM, 2000-2003)
- Wideband TDMA Basestation (WTB, 1999-2000)
- TDMA Locate Receiver (TLR, 1999)
> Main achievements:
- Designed testing strategies and developed test cases (Tk/Tcl, Expect) for Southtel GSM Basestation
- Collected and analyzed performance metrics of the GSM Test Tool, introduced multi-stream execution of test campaigns
- Coded (C and Assembly Langauge) and debugged the ATM drivers; established performance limitations and reliability of the inter-DSP ATM communication
- Designed (using Rational Rose RT) an interface between the DSP (TI6211) and the ASIC for the CDMA searcher
- Designed, coded in assembly language and debugged the fast interrupt handler (Motorola DSP 56303)
- Developed the protocol and designed the ATM-based interface for real-time inter-DSP communications (Motorola DSP 56311)
1994 - 1999
Combustion Engineering Institute
Inchon, South Korea
Positions: Researcher, Senior Researcher
> Major projects:
- On-Board Engine Diagnostics System (1997-1999)
- Diesel Engine Control Unit (1998-1999)
- Exhaust gas treatment system based on streamer corona discharge(1994-1996)
- Spark-Plug Signal Analysis in Combustion Diagnostics (1994-1997)
> Main achievements:
- Created an original engine diagnostic system (based on the analysis of spark-plug breakdown voltage.) Presented the system on the 1999 SAE Congress
- Developed the system (both hardware and software) of spark-plug signal filtration and pattern recognition algorithms for diagnostics of engine knocking and misfire
- Created a novel diesel engine injector and designed electronic control units for it. Presented the design concept at the Ninth International Pacific Conference on Automotive Engineering (1997)
- Developed an exhaust gas aftertreatment unit based on non-equilibrium plasma of a streamer corona discharge
1988 - 1994
Belarus State University
Minsk, Belarus
Position: Junior Researcher, Researcher
> Major projects:
- Record Restoration and Historic Record Digital Remastering (1992-1994)
- Computer Thermal Vision System (1990-1993)
- Robot Vision OCR System (1988-1991)
1985 - 1988
Institute of Cybernetic
Minsk, Belarus
Positions: Engineer, Senior Engineer
> Projects:
- Local Area Network Controller (1986-1988)
- ECG Pattern Recognition and Interpretation System (1985-1987)
Degrees
1998:
State University
Ryazan, Russia
Ph.D. in EE Engineering (Major: Electronic Engine Control)
1992:
State University
Minsk, Belarus
M.Sc. in EE Engineering (Major: Telecommunication Technologies)
1985:
Engineering Institute
Minsk, Belarus
B.Sc in EE Engineering (Major: Electronic Automation)
Professional Affiliations
Member of SAE International
Member of IEEE
References & Publications
References and scientific papers are available upon request
.
999 Technology Dr., Kanata, ON
Phone:
email:
Objective
A position of a leading research scientist in Pinnacle Engine Technology Ltd.
Summary
- Ten years' experience in real-time embedded system design and development
- Seven years' experience in modern telecom industry: theory, software, hardware, systems
- Six years' experience with measurement and control systems for gasoline and diesel engines
- Five years' experience in research on exhaust gas aftertreatment and pollution control
- Four years' experience in design and manufacturing of high-voltage electronic equipment
Experience
1999 - Present
Southtel Networks
Ottawa ON
Position: Software Designer
> Major projects:
- Southtel GSM Test Tool (since 2005)
- Southtel GSMasestation2003-2005)
- Southtel CDMA Modem (NCM, 2000-2003)
- Wideband TDMA Basestation (WTB, 1999-2000)
- TDMA Locate Receiver (TLR, 1999)
> Main achievements:
- Designed testing strategies and developed test cases (Tk/Tcl, Expect) for Southtel GSM Basestation
- Collected and analyzed performance metrics of the GSM Test Tool, introduced multi-stream execution of test campaigns
- Coded (C and Assembly Langauge) and debugged the ATM drivers; established performance limitations and reliability of the inter-DSP ATM communication
- Designed (using Rational Rose RT) an interface between the DSP (TI6211) and the ASIC for the CDMA searcher
- Designed, coded in assembly language and debugged the fast interrupt handler (Motorola DSP 56303)
- Developed the protocol and designed the ATM-based interface for real-time inter-DSP communications (Motorola DSP 56311)
1994 - 1999
Combustion Engineering Institute
Inchon, South Korea
Positions: Researcher, Senior Researcher
> Major projects:
- On-Board Engine Diagnostics System (1997-1999)
- Diesel Engine Control Unit (1998-1999)
- Exhaust gas treatment system based on streamer corona discharge(1994-1996)
- Spark-Plug Signal Analysis in Combustion Diagnostics (1994-1997)
> Main achievements:
- Created an original engine diagnostic system (based on the analysis of spark-plug breakdown voltage.) Presented the system on the 1999 SAE Congress
- Developed the system (both hardware and software) of spark-plug signal filtration and pattern recognition algorithms for diagnostics of engine knocking and misfire
- Created a novel diesel engine injector and designed electronic control units for it. Presented the design concept at the Ninth International Pacific Conference on Automotive Engineering (1997)
- Developed an exhaust gas aftertreatment unit based on non-equilibrium plasma of a streamer corona discharge
1988 - 1994
Belarus State University
Minsk, Belarus
Position: Junior Researcher, Researcher
> Major projects:
- Record Restoration and Historic Record Digital Remastering (1992-1994)
- Computer Thermal Vision System (1990-1993)
- Robot Vision OCR System (1988-1991)
1985 - 1988
Institute of Cybernetic
Minsk, Belarus
Positions: Engineer, Senior Engineer
> Projects:
- Local Area Network Controller (1986-1988)
- ECG Pattern Recognition and Interpretation System (1985-1987)
Degrees
1998:
State University
Ryazan, Russia
Ph.D. in EE Engineering (Major: Electronic Engine Control)
1992:
State University
Minsk, Belarus
M.Sc. in EE Engineering (Major: Telecommunication Technologies)
1985:
Engineering Institute
Minsk, Belarus
B.Sc in EE Engineering (Major: Electronic Automation)
Professional Affiliations
Member of SAE International
Member of IEEE
References & Publications
References and scientific papers are available upon request
.