@echo off
rem Licensed to the Apache Software Foundation (ASF) under one or more
rem contributor license agreements. See the NOTICE file distributed with
rem this work for additional information regarding copyright ownership.
rem The ASF licenses this file to You under the Apache License, Version 2.0
rem (the "License"); you may not use this file except in compliance with
rem the License. You may obtain a copy of the License at
rem
rem http://www.apache.org/licenses/LICENSE-2.0
rem
rem Unless required by applicable law or agreed to in writing, software
rem distributed under the License is distributed on an "AS IS" BASIS,
rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rem See the License for the specific language governing permissions and
rem limitations under the License.
rem =====================================================
rem Environment variables that can be defined externally:
rem
rem JMETER_BIN - JMeter bin directory (must end in \)
rem JM_LAUNCH - java.exe (default) or javaw.exe
rem JVM_ARGS - additional java options, e.g. -Dprop=val
rem JM_START - set this to "start" to launch JMeter in a separate window
rem this is used by the jmeterw.cmd script.
rem
rem =====================================================
setlocal
rem Minimal version to run JMeter
set MINIMAL_VERSION=1.7.0
for /f "tokens=3" %%g in ('java -version 2^>^&1 ^| findstr /i "version"') do (
rem @echo Debug Output: %%g
set JAVAVER=%%g
)
if not defined JAVAVER (
@echo Not able to find Java executable or version. Please check your Java installation.
set ERRORLEVEL=2
goto pause
)
set JAVAVER=%JAVAVER:"=%
for /f "delims=. tokens=1-3" %%v in ("%JAVAVER%") do (
set current_minor=%%w
)
for /f "delims=. tokens=1-3" %%v in ("%MINIMAL_VERSION%") do (
set minimal_minor=%%w
)
if not defined current_minor (
@echo Not able to find Java executable or version. Please check your Java installation.
set ERRORLEVEL=2
goto pause
)
rem @echo Debug: CURRENT=%current_minor% - MINIMAL=%minimal_minor%
if %current_minor% LSS %minimal_minor% (
@echo Error: Java version -- %JAVAVER% -- is too low to run JMeter. Needs a Java version greater than or equal to %MINIMAL_VERSION%
set ERRORLEVEL=3
goto pause
)
if .%JM_LAUNCH% == . set JM_LAUNCH=java.exe
if exist jmeter.bat goto winNT1
if .%JMETER_BIN% == . set JMETER_BIN=%~dp0
:winNT1
rem On NT/2K grab all arguments at once
set JMETER_CMD_LINE_ARGS=%*
rem The following link describes the -XX options:
rem http://www.oracle.com/technetwork/java/javase/tech/vmoptions-jsp-140102.html
rem http://java.sun.com/developer/TechTips/2000/tt1222.html has some more descriptions
rem Unfortunately TechTips no longer seem to be available, except via:
rem https://web.archive.org/web/20090614101951/http://java.sun.com/developer/TechTips/2000/tt1222.html
rem See the unix startup file for the rationale of the following parameters,
rem including some tuning recommendations
set HEAP=-Xms512m -Xmx512m
set NEW=-XX:NewSize=128m -XX:MaxNewSize=128m
set SURVIVOR=-XX:SurvivorRatio=8 -XX:TargetSurvivorRatio=50%
set TENURING=-XX:MaxTenuringThreshold=2
rem Java 8 remove Permanent generation, don't settings the PermSize
if %current_minor% LEQ "8" (
rem Increase MaxPermSize if you use a lot of Javascript in your Test Plan :
set PERM=-XX:PermSize=64m -XX:MaxPermSize=128m
)
set CLASS_UNLOAD=-XX:+CMSClassUnloadingEnabled
rem set DEBUG=-verbose:gc -XX:+PrintTenuringDistribution
rem Always dump on OOM (does not cost anything unless triggered)
set DUMP=-XX:+HeapDumpOnOutOfMemoryError
rem Additional settings that might help improve GUI performance on some platforms
rem See: http://java.sun.com/products/java-media/2D/perf_graphics.html
set DDRAW=
rem Setting this flag to true turns off DirectDraw usage, which sometimes helps to get rid of a lot of rendering problems on Win32.
rem set DDRAW=%DDRAW% -Dsun.java2d.noddraw=true
rem Setting this flag to false turns off DirectDraw offscreen surfaces acceleration by forcing all createVolatileImage calls to become createImage calls, and disables hidden acceleration performed on surfaces created with createImage .
rem set DDRAW=%DDRAW% -Dsun.java2d.ddoffscreen=false
rem Setting this flag to true enables hardware-accelerated scaling.
rem set DDRAW=%DDRAW% -Dsun.java2d.ddscale=true
rem Server mode
rem Collect the settings defined above
set ARGS=%DUMP% %HEAP% %NEW% %SURVIVOR% %TENURING% %PERM% %CLASS_UNLOAD% %DDRAW%
%JM_START% %JM_LAUNCH% %ARGS% %JVM_ARGS% -jar "%JMETER_BIN%ApacheJMeter.jar" %JMETER_CMD_LINE_ARGS%
rem If the errorlevel is not zero, then display it and pause
if NOT errorlevel 0 goto pause
if errorlevel 1 goto pause
goto end
:pause
echo errorlevel=%ERRORLEVEL%
pause
:end
java -version
Picked up _JAVA_OPTIONS: -Xrunjvmhook -Xbootclasspath/a:C:\PROGRA~1\HP\QUICKT~1\
bin\JAVA_S~1\classes;C:\PROGRA~1\HP\QUICKT~1\bin\JAVA_S~1\classes\jasmine.jar
ERROR: JVMPI, an experimental interface, is no longer supported.
Please use the supported interface: the JVM Tool Interface (JVM TI).
Error: could not load Mercury Interactive support. Please run the setup again.
If the problem persists please contact Mercury's Customer support.
Error occurred during initialization of VM
-Xrun library failed to init: jvmhook
java -version
Picked up _JAVA_OPTIONS: -Xrunjvmhook -Xbootclasspath/a:C:\PROGRA~1\HP\QUICKT~1\
bin\JAVA_S~1\classes;C:\PROGRA~1\HP\QUICKT~1\bin\JAVA_S~1\classes\jasmine.jar
ERROR: JVMPI, an experimental interface, is no longer supported.
Please use the supported interface: the JVM Tool Interface (JVM TI).
Error: could not load Mercury Interactive support. Please run the setup again.
If the problem persists please contact Mercury's Customer support.
Error occurred during initialization of VM
-Xrun library failed to init: jvmhook
О, похоже где-то в PATH-e лежит java.bat или java.cmd, причем до родной JRE...
Может быть какой-нибудь HP-овый продукт туда это запузырил?
java -version
Picked up _JAVA_OPTIONS: -Xrunjvmhook -Xbootclasspath/a:C:\PROGRA~1\HP\QUICKT~1\
bin\JAVA_S~1\classes;C:\PROGRA~1\HP\QUICKT~1\bin\JAVA_S~1\classes\jasmine.jar
ERROR: JVMPI, an experimental interface, is no longer supported.
Please use the supported interface: the JVM Tool Interface (JVM TI).
Error: could not load Mercury Interactive support. Please run the setup again.
If the problem persists please contact Mercury's Customer support.
Error occurred during initialization of VM
-Xrun library failed to init: jvmhook
судя по тому что выдает java -version, особенно вот это - _JAVA_OPTIONS: -Xrunjvmhook -Xbootclasspath/a:C:\PROGRA~1\HP\QUICKT~1\
bin\JAVA_S~1\classes;C:\PROGRA~1\HP\QUICKT~1\bin\JAVA_S~1\classes\jasmine.jar
это осталось, по всей видимости от прежней инсталяции HP QUICK TEST PROFESSIONAL - сейчас этой программы уже нет
Kiseta писал(а):
судя по тому что выдает java -version, особенно вот это - _JAVA_OPTIONS: -Xrunjvmhook -Xbootclasspath/a:C:\PROGRA~1\HP\QUICKT~1\
bin\JAVA_S~1\classes;C:\PROGRA~1\HP\QUICKT~1\bin\JAVA_S~1\classes\jasmine.jar
это осталось, по всей видимости от прежней инсталяции HP QUICK TEST PROFESSIONAL - сейчас этой программы уже нет
надо PATH чистить
А вообще, все очень сильно запущено
Kiseta писал(а):
судя по тому что выдает java -version, особенно вот это - _JAVA_OPTIONS: -Xrunjvmhook -Xbootclasspath/a:C:\PROGRA~1\HP\QUICKT~1\
bin\JAVA_S~1\classes;C:\PROGRA~1\HP\QUICKT~1\bin\JAVA_S~1\classes\jasmine.jar
это осталось, по всей видимости от прежней инсталяции HP QUICK TEST PROFESSIONAL - сейчас этой программы уже нет
надо PATH чистить
А вообще, все очень сильно запущено
давайте чистить path, про запущенность потом поговорим
как оказалось, ничего там не установлено. Директория Oracle есть, но дальше в ней ничего Java и тд. нет.
