Resume на поругание

[Azz]

Name, B.Sc., EIT at APEGBC.

Burnaby, Phone: 778.xxx.xxxx
BC, Canada Email: name@gmail.com
________________________________________
QA Engineer
Started career from an intern position as QA Engineer in Start-up company “N-trig”. Recognized as a hands-on engineer and promoted to permanent V&V Engineer position. Experienced working under pressure and bringing the test results, solutions of hardware and software problems to meet strict deadlines. Was responsible for execution and creation of application and hardware tests and solution; resolved production problems at the assembly line. Experienced working with multidisciplinary teams, coordinating fieldwork, performing quantitative and qualitative analysis, writing clear and concise reports and presenting findings. Possess strong interpersonal, communication and negotiation skills.

COMPUTER PROFICIENCIES
• Programming Languages: C, VHDL, Verilog, MatLab
• Applications: Cadence Design Systems P-Spice, L-Spice, S-Spice, SoftMEMS, MEMsPro, Cadence OrCAD 10.5, Microsoft V.S. 6.0, MathWorks, MatLab 7.0, IBM Rational Clear Quest
• Equipment: Agilent 3220A Signal Generator, Keithley DMM, DS3012\TDS3054 Oscilloscope, Spectrum Analyzer

LANGUAGES
• English - fluent
• Russian - native
• Hebrew - native

PROFESSIONAL EXPERIENCE
N-Trig (www.n-trig.com), Israel 2006 – 2009
Validation and Verification (V&V) Engineer
N-trig’s DuoSense™ technology combines pen, touch and multi-touch in a single device, using zero-pressure capacitive touch.
The position required a deep understanding of hardware implementations of sensor, PCBA, ASIC and stylus in order to create specific test plans and gave the problem’s root cause.
• Created and executed software application and hardware tests. Designed validation, and reliability testing
• Wrote test plans, system test procedures (STP) and acceptance test procedures (ATP)
• Composed scripts for computerized systems (robot machines) and used IBM ClearQuest for the bug management process
• Was responsible for validation of Hardware diagnostic tools such as PCBA, Sensor connectivity and Stylus Testers for assembly lines at China, Taiwan, Ireland
• Performed the following tests: Bundles - installation process, Driver versions which would be included in Windows 7 as part of “driver in the box”, Firmware of a touch sensor, diagnostic tools, “Self test” software tools (N-Trig Windows Diagnostic tool, N-Trig Dos Diagnostic tool, N-Trig Development Diagnostic tool)
• Tested all new software touch features in all “N-Trig” projects ( Lenovo X300, Parker Dell, AMG Dell, Soyuz 3 HP, Motion)
• Was responsible for training apprentices


N-Trig (www.n-trig.com), Taiwan 2008
Field Support Engineer
Played a key support role during all stages of testing and resolving software problems as senior V&V Engineer. Found the problem in testing procedure which cost the company approximately $10,000 each day.
• Analyzed and resolved design issues, production problems at the assembly line in the company factories in Taiwan (AUO, Taipei)
• Burned firmware to “touch and pen” sensor’s controller at factory’s clean room and assembled sensors to LCD for the following assembling process
• Acted as a conduit between AUO manufacture in Taiwan and N-Trig’s R&D and support teams located in Israel

EDUCATION
Courses: VHDL and Verilog, Altera, Canada 2009
Course: “Microelectronics and NANO Technologies”, Intel, Israel 2008
Tel Aviv University, Israel 2004 – 2008
Bachelor of Science: Electrical and Electronic Engineering
GPA: 80/100

SERTIFICATIONS
APEG BC, Canada 2009
Engineer in Training Program: Computer Engineer

[Gatchinskiy]

SERTIFICATIONS..

проверь спеллинг всего в ворде...

Was responsible - замени на другое, не любят его здесь в резюме...

[Gatchinskiy]

COMPUTER PROFICIENCIES
• Programming Languages: C, VHDL, Verilog, MatLab
• Applications: Cadence Design Systems P-Spice, L-Spice, S-Spice, SoftMEMS, MEMsPro, Cadence OrCAD 10.5, Microsoft V.S. 6.0, MathWorks, MatLab 7.0, IBM Rational Clear Quest
• Equipment: Agilent 3220A Signal Generator, Keithley DMM, DS3012\TDS3054 Oscilloscope, Spectrum Analyzer

LANGUAGES
• English - fluent
• Russian - native
• Hebrew - native

..

языки - ф топку

COMPUTER PROFICIENCIES я бы заменил на что-то другое liike TECHNICAL SUMMARY, как то режет глаз, отдельно строкой выделить - Automated testing tools и Defect -tracking systems, это важно...

[Azz]

1. а на 4то менять was responsible?
2. Sertification - не заметил
3. языки то4но убирать или переместить в конец?

[Gatchinskiy]

1. а на 4то менять was responsible?
2. Sertification - не заметил
3. языки то4но убирать или переместить в конец?

1. на другой синоним
2. ...
3. точно

P.S. а откуда ты знаешь что у тебя English - fluent, так просто интересно...

[Azz]

Fluent:

* Reading: the ability to easily read and understand texts written in the language;
* Writing: the ability to formulate written texts in the language;
* Comprehension: the ability to follow and understand speech in the language;
* Speaking: the ability to speak in the language and be understood by its speakers.

Spasib

[Gatchinskiy]

ок, а то думал-гадал какой же у меня?

[папа Карло]

цель напиши. я без цели резюме сразу в топку отправляю.

[Azz]

цель напиши. я без цели резюме сразу в топку отправляю.

4то то типа:
Looking to expose myself to hardware engineering aspects of semiconductor industry.

или:
Looking for position of Hardware Engineer.

4то лу4ше?

[Azz]

после каректировки:

NAME, B.Sc., EIT at APEGBC.

Burnaby, Phone: 778.xxx.xxxx
BC, Canada Email: NAME@gmail.com
________________________________________
OBJECTIVE
Electronics Engineer
Looking to expose myself to hardware engineering aspects of semiconductor industry.
Started career from an intern position as QA Engineer in Start-up Company “N-trig”. Recognized as a hands-on engineer and promoted to permanent V&V Engineer position. Experienced working under pressure and bringing the test results, solutions of hardware and software problems to meet strict deadlines. Executed and created application and hardware tests; resolved production problems at the assembly line. Experienced working with multidisciplinary teams, coordinating fieldwork, performing quantitative and qualitative analysis, writing clear and concise reports and presenting findings. Possess strong interpersonal, communication and negotiation skills.
TECHNICAL SUMMARY
• Programming Languages: C, VHDL, Verilog, MatLab
• Defect/Bug Tracking Systems: IBM Rational Clear Quest
• Applications: Cadence Design Systems P-Spice, L-Spice, S-Spice, SoftMEMS, MEMsPro, Cadence OrCAD 10.5, Microsoft V.S. 6.0, MathWorks, MatLab 7.0
• Equipment: Agilent 3220A Signal Generator, Keithley DMM, DS3012\TDS3054 Oscilloscope, Spectrum Analyzer

PROFESSIONAL EXPERIENCE
N-Trig (www.n-trig.com), Israel 2006 – 2009
Validation and Verification (V&V) Engineer
N-trig’s DuoSense™ technology combines pen, touch and multi-touch in a single device, using zero-pressure capacitive touch.
The position required a deep understanding of hardware implementations of sensor, PCBA, ASIC and stylus in order to create specific test plans and gave the problem’s root cause.
• Created and executed software application and hardware tests. Designed validation, and reliability testing
• Wrote test plans, system test procedures (STP) and acceptance test procedures (ATP)
• Composed scripts for computerized systems (robot machines) and used IBM ClearQuest for the bug management process
• Validated Hardware diagnostic tools such as PCBA, Sensor connectivity and Stylus Testers for assembly lines at China, Taiwan, Ireland
• Performed the following tests: Bundles - installation process, Driver versions which would be included in Windows 7 as part of “driver in the box”, Firmware of a touch sensor, diagnostic tools, “Self test” software tools (N-Trig Windows Diagnostic tool, N-Trig Dos Diagnostic tool, N-Trig Development Diagnostic tool)
• Tested all new software touch features in all “N-Trig” projects ( Lenovo X300, Parker Dell, AMG Dell, Soyuz 3 HP, Motion)
• Was responsible for training apprentices


N-Trig (www.n-trig.com), Taiwan 2008
Field Support Engineer
Played a key support role during all stages of testing and resolving software problems as senior V&V Engineer. Found the problem in testing procedure which cost the company approximately $10,000 each day.
• Analyzed and resolved design issues, production problems at the assembly line in the company factories in Taiwan (AUO, Taipei)
• Burned firmware to “touch and pen” sensor’s controller at factory’s clean room and assembled sensors to LCD for the following assembling process
• Acted as a conduit between AUO manufacture in Taiwan and N-Trig’s R&D and support teams located in Israel

EDUCATION
Courses: VHDL and Verilog, Altera, Canada 2009
Course: “Microelectronics and NANO Technologies”, Intel, Israel 2008
Tel Aviv University, Israel 2004 – 2008
Bachelor of Science: Electrical and Electronic Engineering
GPA: 80/100

CERTIFICATIONS
APEG BC, Canada 2009
Engineer in Training Program: Computer Engineer